Link One
Register as a partner installer 

Link Two
Register as an independent installer

edgeConnected Installer App
Google PlayStore

edgeConnected Installer App
Apple Store

For support: Go here

Call: 1300 334 329

Site Registration Steps

Before beginning the site registration, make sure you have registered as an installer with edgeConnected.

If you have not registered please find the links to register above. 

Once you have filled in your registration details you will receive an email with an activation link. Follow the link to create your user details, make sure you keep a note of them. If you do not receive a user activation email please contact us at the details listed above.

Now that you have installed the edgeConX hardware and have registered as an Installer you are ready to begin the site registration process for a commercial site for a business.

The edgeConX products that can be installed for a commercial site are the Energy Monitor and PowerSave.

Step 1
Firstly ensure you have download the edgeConnected app. Proceed to open the edgeConnected app and log in.

Step 2
Enter the name of the site business name. If you cannot locate the correct business name, please enter Edge Electrons. Proceed by clicking the commercial site option.

Step 3
Scan the serial number on the device or manually enter it. Please note the serial number will begin with EE. You will find the serial number on both the device and its packaging.

Step 4
Enter the address where the device is to be installed.

Step 5
For installing an Energy Monitor select the electrical phasing of the property including if there is solar and battery. If the device requires a Wi-Fi connection, please perform the connection at this point before proceeding further.

Step 6
For installing an Energy Monitor make sure you label each of the CTs installed. It is STRONGLY recommended that 1 CT be assigned to the grid wire for a single-phase home, 2 CTs for a dual-phase home, and 3 CTs for a three-phase home.*If you’ve required larger CTs during the install, please make note of it.

Step 7
If installing a PowerSave review the site configuration and check that the device settings are correct

Step 8
If installing an Energy Monitor review the site configuration and check that the device settings are correct.

Step 9
Enter the company and site user details. If the company cannot be found enter the new details.

Your customer will then receive an email regarding their device registration and activation. Please check they receive this email, and check the junk mail if it does not appear in their inbox. They will need this email in order to activate their account, enter their details, and download the edgeConX app.